Waiter ECC is designed to be a direct plug and play replacement for your existing Intellitec ECC system. Unplug the old operator panel and control module, plug in the new control board and touchscreen, and you’re ready to go. Feedback from our customers tell us it took about 20 minutes to do the basic install (swap boards, install touchscreen, unit up and running). Routing and installing the external temperature sensor took about an hour.
Although no wiring changes are required, we highly recommend installing an ON/OFF switch near the control module to make it easier to remove power or reboot the system. (switch included in kit)
The touch screen is slightly larger than the old Intellitect operator panel, so in most installations, the wall opening will need to be made approximately 1/8 – 1/4 inch taller to accommodate the new touchscreen. A mount template is included or you can use an optional Wall Mount Plate to assist in marking the new opening size. Read through the INSTALLATION MANUAL to get an idea of what needs to be done.